Trialing a Weaving Draft
I have spent some time spinning a big batch of fibre tops, from John Arbon again, to fulfil my ambition to weave a length of fabric from my own handspun yarn - the reason I began spinning in the first place! The wound balls below are 'Toot Sweet', organic merino and silk, intended for the warp.
Each of the 21 balls is approximately 50g, 20 wraps per inch, that took me about two evenings each to spin.
I have carefully measured each one and find that I have more than 4,200 metres, more than enough for a 7 metre warp, 34 inch loom width.
This basket contains the first of the fibre for the weft yarn, 'Rose Gold' alpaca supreme, again from John Arbon. It will take some time to spin this 1k batch and I am purposely not beginning it until we get back from holiday. I find it can be difficult to keep to the same weight and twists per inch after a long break. If I manage to spin to the same weight as the red I have calculated that my twill warp will need 14 ends to the inch.
I thought I might be able to do a small sample, to wash/wet finish, on this pin loom to check the right warp sett. Unfortunately, as you can see, a tabby weave would be more appropriate as it is only 12 threads per inch. Hey ho! it may suite a different project!
I have a number of woollen yarn cones on my shelves so I decided to try the weave draft I have selected, possibly, for the handspun yarn. I believe it's called 'Wall of Troy'. After weaving over a metre of this I reverted to a simple 2/2 twill treadling in order to get the length off my loom but I've not finished the length yet.
